Persones / Equip Humà

Arnau Valls Esteve

Buscador de publicacions

Publicacions

  • Nieva G, Agulló N, Grande-Molina M, Adell NE, Tarrado X, Calvo-Duarte L, Valls-Esteve A, Krauel L, Fenollosa-Artés F, Teixidó R and Borròs S.

    Developing Tunable Viscoelastic Silicone Gel-Based Inks for Precise 3D Printing of Clinical Phantoms

    Materials Advances . : 1-21.

    [doi:10.1039/D4MA00011K]

  • Valls-Esteve A, Tejo-Otero A, Adell NE, Lustig-Gainza P, Fenollosa-Artés F, Buj-Corral I, Rubio-Palau J, Munuera-del Cerro JL and Krauel L.

    Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases

    BIOENGINEERING-BASEL . 11(1): .

    [doi:10.3390/bioengineering11010031]

  • Engli M, Adell NE, Marturià G, Munuera-del Cerro JL and Valls-Esteve A.

    Soluble vs Non-Soluble Support Materials for Bone 3D Printed Anatomical Models: A Comparison on Production Time, Cost and Finish Quality

    Key Engineering Materials . 958: 13-20.

    [doi:10.4028/p-0eVVHy]

  • Biglino G, Hopfner C, Lindhardt J, Moscato F, Munuera-del Cerro JL, Oberoi G, Tel A and Valls-Esteve A.

    Perspectives on medical 3D printing at the point-of-care from the new European 3D Printing Special Interest Group

    3D Printing in Medicine . 9(1): 14-14. Nº de cites: 2

    [doi:10.1186/s41205-022-00167-3]

  • Valls-Esteve A, Adell NE, Pasten A, Barber-Martínez de la Torre I, Munuera-del Cerro JL and Krauel L.

    Exploring the Potential of Three-Dimensional Imaging, Printing, and Modeling in Pediatric Surgical Oncology: A New Era of Precision Surgery

    CHILDREN-BASEL . 10(5): 832. Nº de cites: 6

    [doi:10.3390/children10050832]

  • Cristobal Langdon Montero, Hinojosa J, Munuera-del Cerro JL, Gómez-Chiari M, Haag OH, Veneri A, Valldeperes A, Valls-Esteve A, Adell NE, Santamaria V, Cruz-Martínez O and Morales-La Madrid A.

    3D printing as surgical planning and training in pediatric endoscopic skull base surgery-Systematic review and practical example

    INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY . 168: 111543-111543. Nº de cites: 4

    [doi:10.1016/j.ijporl.2023.111543]

  • Valls-Esteve A, Tejo-Otero A, Lustig-Gainza P, Buj-Corral I, Fenollosa-Artés F, Rubio-Palau J, Barber-Martínez de la Torre I, Munuera-del Cerro JL, Fondevila C and Krauel L.

    Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training

    Gels . 9(4): . Nº de cites: 4

    [doi:10.3390/gels9040339]

  • Valls-Esteve A, Lustig-Gainza P, Adell NE, Tejo-Otero A, Engli M, Julian-Alvarez E, Navarro-Sureda O, Fenollosa-Artés F, Rubio-Palau J, Krauel L and Munuera-del Cerro JL.

    A state-of-the-art guide about the effects of sterilization processes on 3D-printed materials for surgical planning and medical applications: A comparative study

    International Journal of Bioprinting . 9(5): 145-165. Nº de cites: 4

    [doi:10.18063/ijb.756]

  • Garcia P, Isabel-Roquero A, Aurensanz E, Valls-Esteve A, Miguel FA, Ormazabal D, Llanos F and Sanchez deToledo J.

    Machine Learning-Based Systems for the Anticipation of Adverse Events After Pediatric Cardiac Surgery

    Frontiers in pediatrics . 10: 930913-930913. Nº de cites: 4

    [doi:10.3389/fped.2022.930913]

  • Tejo-Otero A, Valls-Esteve A, Fenollosa-Artés F, Siles-Hinojosa A, Nafria-Escalera B, Ayats-Soler M, Buj-Corral I, Otero MC, Rubio-Palau J, Munuera-del Cerro JL and Krauel Vidal X.

    Patient Comprehension of Oncologic Surgical Procedures using 3D printed Surgical Planning Prototypes

    Annals of 3D Printed Medicine . 27: .

    [doi:10.1016/j.stlm.2022.100068]